Detailed Guide To Fix The Linksys Router Red Light
Worried about the Linksys router red light? Forget it! You are at the right place to understand and fix it. Generally, the red light on the Linksys router appears when there is no internet on the router. However, several reasons give rise to this problem, so it is necessary to find them first.
Additionally, if you want to find out more about the red light on the Linksys router, then this guide will assist you. Here, we shed light on the solid and blinking red light on Linksys router among their meanings, reasons, and troubleshooting tips. So, to gain a deeper understanding of the same, stay tuned to this post!
A little bit about Linksys router red light
Furthermore, ahead of your move, it is necessary to understand the meaning of the solid and flashing red LED on your Linksys networking device. So, take a look beneath:
Solid red: When there is no internet on the router, then a solid red light appears.
Blinking red: This light behavior indicates that the router is not linked to the modem.
Here, we define the different red light behaviors on your Linksys networking device. Hope, this will help to find out the causes behind the red LED on your router.
How to troubleshoot the Linksys router red light solid & blinking?
Moreover, you now understand the meaning of the red light scenarios in the above section. Now, it is time to look at the reasons and solutions to fix this issue on your networking device. Similarly, in this section, we shed light on the causes and fixes, so read thoroughly:
Reasons for the red light on the Linksys router
Here, a list of the primary reasons is shared that give rise to a solid or blinking red light on Linksys router, have a glance:
- Unstable network/signal barriers
- Outdated firmware
- Damaged WAN port
- Loose cable connections
- ISP issues
- Technical glitches and bugs
Troubleshooting tips to fix solid/blinking red light on Linksys router
In the above-given section, you find the responsible causes for the appearance of the persistent red LED on your Linksys router. Now, we highlight the easy solutions to resolve this red light issue, take a glance:
- Initially, check that the router and modem get enough power supply and voltage is not higher or less than recommended.
- Also, look at the cable connections as these are not loose and none of the cables is damaged.
- Place the router in a ventilated area where signal strength is good.
- To stabilize the internet connection, use an ethernet cord and connect it to the router and modem.
- Eliminate the signal interferences, such as mirrors, furniture, microwaves, cordless phones, etc.
- Contact your local ISP to avoid persistent network issues.
- Do not use the router/modem with the damaged WAN port as it restricts the network connection.
- Power cycle the router to get rid of technical glitches and bugs. After that, check if the Linksys router flashing red light issue gets fixed.
- Check the router for firmware update. If the window prompts for the update, then proceed with the on-screen instructions.
- Also, look at the hardware of the router, if find any faulty parts, then replace them.
- When nothing else works, then factory reset the router and reconfigure it from scratch.
In closing
All things considered, this brief summarizes the root causes and troubleshooting tips for the Linksys router red light issue. Additionally, we outline the meaning of the solid and flashing red lights, considering the reasons and fix-outs for the same. Hope you find this guide helpful and for further queries, reach out to our professional team!